Retaining Ring Wrench Handle for AMT0032 Heads – 1/2" Drive

Drive any Marine Tech Tools AMT0032 retaining ring wrench head with one handle. The AMT0031 slips over the prop shaft and takes a 1/2" square drive ratchet, breaker bar or impact gun, so you can turn the bearing carrier retaining ring on Yamaha, Mercury, Suzuki and Honda gearcases.

Retaining rings vary in diameter across makes and horsepower, so instead of buying a separate wrench for every motor, buy the handle once and add the head each ring needs. The patent-pending spline drive carries the load through the splines, not the bolts. Nickel-plated steel for corrosion and wear resistance. Backed by the Marine Tech Tools lifetime warranty.

Fits These Motors

• Yamaha, Mercury, MerCruiser, Suzuki and Honda gearcases with AMT0032-series retaining rings

Not sure which one fits? Use the Retaining Ring Wrench Finder on our lower unit tools page.

Specifications

• Drive: 1/2" square
• Fits: all AMT0032 retaining ring wrench heads
• Material: nickel-plated steel

Works With

• 61mm, 4-Tooth Head (AMT0032-006)
• 69mm, 12-Tooth Head (AMT0032-001)
• 83mm, 12-Tooth Head (AMT0032-009)
• 85mm, 12-Tooth Head (AMT0032-0021)
• 87mm, 12-Tooth Head (AMT0032-002)
• 94mm, 12-Tooth Head (AMT0032-003)
• 99mm, 12-Tooth Head (AMT0032-007)
• 104mm, 12-Tooth Head (AMT0032-005)
• 109mm, 16-Tooth Head (AMT0032-004)
• 121mm, 12-Tooth Head (AMT0032-010)
• Lower Retaining Ring Wrench Set (K1003) — this handle plus eight heads