Prop Shaft and Bearing Housing Remover for Johnson and Evinrude 25–35hp

Pull a stuck bearing carrier with a slide hammer instead of a bearing carrier puller. The AMT0054-006 threads onto the prop shaft where the prop nut goes on 1984-2001 Johnson and Evinrude 25–35hp outboards, and a standard automotive slide hammer (5/8-18 UNF) threads into the other end, so each hit draws the carrier and prop shaft straight out of the gearcase. Works on standard and counter-rotating lower units. Black oxide coated steel. Backed by the Marine Tech Tools lifetime warranty.

Fits These Motors

• Johnson and Evinrude 25–35hp outboards (1984–2001)

Specifications

• Slide hammer thread: 5/8-18 UNF
• Finish: black oxide coated steel

Other motors take a different size. See every prop shaft and bearing housing remover on our lower unit pullers page.