FREE 2-DAY SHIPPING
ALL DOMESTIC ORDERS
Back to Top
Learn More From Marine Tech
Marine Tech’s 2022 SeaStar Tools
Posted: February 14, 2022
As boat owners ourselves, we’re more than familiar with typical repair difficulties. As we encounter problems fixing our own boats, we look for ways to solve those problems and make repairing and maintaining your boat as painless as possible.
Our line of SeaStar tools is designed for exactly that purpose. From our comprehensive bleeding kit to our stronger-than-average pin wrenches, we aim to eliminate frustration and save you valuable time and money on boat repairs.
RETURN DISCONNECT KIT FOR POWER PURGE JR AND BUBBLE BUSTER (SKU #: AMT0030): $16.00
If you’ve used the Power Purge Jr. or Bubble Buster, you’ll know they have one shortcoming: when you’re bleeding an older system, you’re likely to end up bleeding the contaminated fluid straight into your reservoir.
To fix this problem, we’ve developed this disconnect kit, which makes it easy for you to disconnect the return line and bleed the contaminated oil into a bucket, then easily reconnect when you’re ready to push fresh fluid through.
25' RETURN HOSE EXTENSION (SKU #: AMT0109): $40.00
This 25’ return hose extension is part of our SeaStar Hydraulic Steering Bleed System. Change your boat’s fluid quickly, easily, and with little to no mess.
BLEED SYSTEM, FITS SEASTAR HYDRAULIC STEERING (SKU #: AMT0106): $249.00
The complete Bleed System Kit includes a 3-quart reservoir, 25’ return hose, brass helm fill adapter, and a ½” thin wrench for bleed fittings, all stored in a 5-gallon bucket for easy storage and portability. The system uses gravity instead of electricity — so no battery hookups required! — and has quick, leak-free disconnects on all fittings.
BLEED TUBE, FITS SEASTAR HYDRAULIC CYLINDERS (SKU #: AMT0096): $20.99
This bleed tube is part of our SeaStar Hydraulic Steering Bleed System and is built to connect between the fluid container and the helm reservoir opening. Change your boat’s fluid quickly, easily, and with little to no mess.
FILL TUBE, FITS SEASTAR HYDRAULIC STEERING. REPLACES HA5438 (SKU #: HA5438): $25.00
This fill tube fits all SeaStar Hydraulic Helms and is part of our SeaStar Hydraulic Steering Bleed System. Change your boat’s fluid quickly, easily, and with little to no mess.
HYDRAULIC STEERING FILLER KIT WITH SWIVEL (SKU #: AMT0117): $25.00
This Hydraulic Steering Filler Kit makes it easy to change your boat’s fluid quickly and without the usual mess. We engineered the quick disconnect fitting ourselves after receiving a lot of questions and feedback about how difficult it was to install and disconnect fill tubes.
MARINE TECH TOOLS SEASTAR BLEED FITTING SET (SKU #: AMT0059): $14.00
This quick disconnect fitting is part of our SeaStar Hydraulic Steering Bleed System. Combine it with our bleed tube for your own DIY bleed kit, or connect it to the bleed fittings on your SeaStar hydraulic cylinders or SeaStar power purge. The leak-proof quick disconnect makes it easy to bleed the system quickly and cleanly.
MULTIPLE STEERING CYLINDER ADAPTOR (SKU #: AMT0108): $95.00
If you need to bleed a system that has multiple cylinders, the regular bleed kit won’t have enough connections. So we’ve developed this adapter for multiple-cylinder steering configurations, still featuring our quick disconnect fittings for easy, mess-free bleeding.
PIN WRENCH - 38MM X 4MM (SKU #: AMT0004): $62.99
This 38mm pin wrench comes with six L-4 pins and is crafted to be stronger than the average wrench strength. It fits all SeaStar steering cylinders, as well as various other trim and tilt caps. Note that it is not compatible with VMAX.
PIN WRENCH - 35MM X 5MM (SKU #: K1017): $62.99
This 35mm pin wrench comes with six L-5 pins and is crafted to be stronger than the average wrench strength. It’s compatible with Uflex steering cylinder trim and tilt caps.
SEASTAR / UFLEX SUPPORT BRACKET PULLER (SKU #: AMT0001): $49.99
SeaStar support brackets can be tough — and dangerous — to remove. To save you time, effort, and potential damage, we’ve created this puller specifically for removing those stubborn support brackets in less than a minute.
Shop Marine Tech for Your SeaStar Needs
Whether you need a comprehensive bleeding solution or just a few key components, our products are crafted with efficiency and quality in mind. We’re proud to offer a 100% money-back guarantee on your purchases and free shipping on all domestic orders.
Learn More From Marine Tech:
Recent Posts
