SKU: AMT0306

32mm x 4mm Pin Wrench for Yamaha, Honda, Evinrude Trim Caps – Replaces AMT0006

Name: 32mm x 4mm Pin Wrench for Yamaha, Honda, Evinrude Trim Caps – Replaces AMT0006
Brand: Marine Tech Tools
SKU: AMT0306
Price: 61.75 USD
Availability: InStock

In Stock

$61.75

Shipping calculated at checkout.

Ready to ship

View Full Details

Remove and install 32mm trim and tilt caps on Showa-built trim units, including Yamaha F115–F150, Honda and Evinrude outboards, without stripping the pin holes. The AMT0306 replaces our original AMT0006 and does the same job as Yamaha tool YB-06175-1A. It comes with two pin sets, L-4 and L-4.5, and also removes Yamaha 64E-series trim cylinder caps.

The AMT0306 is part of our patented 300 Series. Its hex body fits the Pin Wrench Sleeve (AMT0170): slide the sleeve over the wrench, lower the outboard onto it, and the motor's weight holds the wrench flat in the cap so it can't kick out, even with a breaker bar and cheater pipe. The body is polished stainless steel with a 1/2" square drive, and the pins are rated to at least 200 ft-lb. Backed by the Marine Tech Tools lifetime warranty.

Reference part numbers: YB-06175-1A, AMT0006

Fits These Motors

Yamaha F115–F150 four-strokes
Honda outboards with Showa trim units
Evinrude outboards with Showa trim units, including E-TEC 150
Other Showa-built trim/tilt units with 32mm caps

Fits These Parts

Yamaha 64E-series trim cylinder caps, including 64E-43821-08-00

Not sure which one fits? Use the selector at the top of the trim/tilt wrench category page.

Specifications

Pin stance: 32mm
Pins: six L-4mm and six L-4.5mm, replaceable
Drive: 1/2" square
Torque rating: 200 ft-lb minimum
Body: polished stainless steel

Works With

Pin Wrench Sleeve (AMT0170) — locks the wrench in the cap
Replacement Pins, L-4mm, set of 6 (AMT0050)
Replacement Pins, L-4.5mm, set of 6 (AMT0176)
Yamaha Trim Seal Kit for 64E-43821 Caps (K1020)
3-Piece Pin Wrench Master Set (K1001) — includes this wrench

5 stars: 35 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

It was effortless to remove the trim cap with the new tooling!!! Previous tool broke the pins off

Worked perfectly for my 2010 yamaha F115. Pins strong and all.

Great tool, works as intended, would definitely recommend.

Worked perfectly.

I had to replace a damaged trim rod

I had to replace a damaged trim rod on my Evinrude ETEC 150. This motor is 12 years old and the tilt-trim rams have never been removed before so I was expecting some difficulty in getting the end cap removed especially since the motor sees only saltwater service. This AMT 0306 tool fit perfectly on the trim cap and a 24" breaker bar made short work of removing the trim cap. Don't be fooled by those $20 removal tools - get this quality tool from Marine Tech because you get what you pay for.

This tool was amazing. Received it lightning fast. It’s an impressive quality. I loosened 4 Yamah...

This tool was amazing.

Great tool!

Great tool! Strong, well made. Removing the trim cap was a breeze.

I was very pleased to ...

I was very pleased to see that this tool looks and feels well built. the shipping was free which is always a big factor. I also received the tool in a timely manor. I have not used it yet but will in the near future, thanks

Wrench Worked Well

The wrench is well-built and worked very well for my 2006Yamaha F150. In my case, the outboard has been used on a freshwater lake since new so I didn't have any corrosion to deal with. A little tricky to use since one must keep the AMT0306 very flat against the cylinder caps while simultaneously turning the cheater bar used on with the socket wrench. In the end, the AMT0306 made short work of cap removal and installation.

High quality tool you will ...

High quality tool you will have for a lifetime and higher quality than Sn-p On sells for 3x the price!

Don’t ruin the trim caps on your outboard with the super cheap junk tools made in someone’s kitchen….

This tool was a lifesaver ...

This tool was a lifesaver exactly fit quick removal and install in minutes worth every penny! Will eventually order more of these tools ???? as needed!

quality made tool, worked perfect

quality made tool, worked perfect

Good quality strong tool.

Good quality strong tool. Made it easy to remove trim tab covers on a 2002 90hp Honda outboard.
I had tried a cheaper y shaped tool from Ebay, pin holes were miss drilled and bent, don't waist you time and money.
Marine tool worked perfect.

Great tool. Will definitely use Marine Tech again for future purchases

Perfect fit and comes with two different size pins. The fit was perfect for my older 2 stroke tilt and trim. Shipping was fast. Arrived before the weeks end and i was back on the water for the weekend. Thank you.

Well made tool, two sets of pins included.

Fits perfectly due to having 2 sets of pins included. NOW, if repair parts would arrive I could get the job done. Any chance Marine Tech could start selling Yami parts too? Your tool arrived in 2-3 days all the way across the country to Oregon. Can't wait to actually use it. Thanks. Bill

Well made and works perfectly.

Used this to service the trim/tilt cylinders on my 1999 OX66 Yamaha. Impressively well made tool. The trim cylinder caps came right off using this tool after 25 years of being together.

Good quality and extra pins provided in case of shear failure

Tool worked great! I like that a couple extra pins were included in case of shear failure removing the cylinder caps. Comments from a you tube video recommended using a PVC pipe segment pushed down by the engine to apply pressure on the tool head and hold it firm against the caps while breaking the caps loose. I tried that and it worked very well. No pin failure or tool slipping off.

grate product

very good product that worked perfectly with no problems i would Highley recommend

Made job very easy

Product is excellent

Excellent tool.

Purchased to repair Showa trim caps that were leaking. I am so glad to have all 4 pins because those caps require a lot of force to break them loose.

I would like my money back on the first one I bought that i sent back too you!

Once i got the right one for my model boat it worked perfectly no problem!

The right tool for the job makes all the difference

This tool made replacing my Trim Cylinder seals easy. Fits perfectly and did not even scratch the paint. Thank you for this tool

Great service and fast shipping..Good job Marine Tech.!!

Fast friendly service and precision parts.!!

Perfect fit and function.

Perfect fit and function.
Fairly rapid shipping.

Pin Wrench - AMT0006 - 32mm X 4mm (AMT0006)

work great built tough

Professional quality product.

Very good, high quality product.

They were great to deal with.

Quality wrench works great, I like the 4 pin style.

Quality Tool

Great Tool Works Perfect

Awesome!

This tool is awesome!

worked well

great tool

Does exactly what it is supposed to do

Excellent Wrench

Well designed tool.

Purchased pin wrench, AMT0006, to remove the trim caps off my 2002 Yamaha 90 TLRA. Tool is well made and was supplied with two sizes of pins. Used the S-4 pins which were a perfect mate to the holes in the caps. Caps were on tight but this tool along with a 24" breaker will remove them. When using, make sure you keep the tool tight against the cap! A video of the entire process, including tilt cap seal replacement, can be seen at: https://youtu.be/5fefUUx3Xa0

very good service

good product