Marine Tech is excited to share with you our most popular and problem-solving tools of all time. We know you’ll get some great results from these products when problems arise and we are happy to be a part of the solution. Let’s get started.

1. Yamaha Trim/Tilt Pin Wrench Set

Our versatile wrench set works on all Yamaha, Evinrude, Johnson, and Suzuki trim and tilt end caps as well as Seastar hydraulic end caps. This set comes as a 3 wrench package, but you can also purchase each wrench separately. These wrenches withstand a 1minimum of 180 ft pounds of strength due to their ultra high strength stainless steel. 80 ft pounds of strength due to their ultra high-strength stainless steel.

2. Upper Bearing Carrier Puller

 

Only available from Marine Tech! This unique tool is crucial to saving time and reducing potential damage from prying or pushing when removing upper carrier bearings. It’s also very versatile and works with Honda, Suzuki, Evinrude, Johnson, and Mercury upper bearing housing units. That makes this puller a “Must Have” for boaters.

3. Lower Bearing Carrier Puller

Another Best Seller! This powerful screw drive Lower Bearing Housing Puller will remove the toughest Lower bearing housings from lower units (115hp and above.)

    • Pivoting arms will fit in a variety of hub diameters

    • High Strength Steel will take professional abuse for Life

    • Positive gripping hooks

    • Fine thread screw drive to maximize mechanical advantage, use with hand ratchet or air impact

    • Zero friction head for efficient and damage-free operation.  

      4. 32mm x 4mm Pin Wrench

      This pin wrench has been an absolute bestseller. Our customers love the strength and durability this wrench has to offer. Works great to remove those stubborn trim caps. It reduces time and potential for damage.

      5. Lower Retaining Ring Wrench Set

      This versatile wrench set fits Yamaha, Honda, Suzuki, and Mercury. This set contains a ½ inch handle and 8 interchangeable teeth to conveniently cover all Mercury and Yamaha Outboards/drives.  With this handy set - remove your lower bearing carrier retaining ring with ease. 

      6. 38mm x 4mm Pin Wrench

      Professional Quality Forged Stainless Steel Pin spanner wrench. AMT0004 - 38mm x S-4mm Pins

      • LIFETIME WARRANTY on body
      • Replacement Pins Available

      FITS:

      • All SeaStar Steering Cylinders
      • Trim and Tilt caps on ALL Four Stroke V6 (F200-F300)(3.3L, 4.2L)
      • Trim and Tilt Caps 2 strokes (225-300hp)(Non VMAX)
      • Tilt Cap ONLY on 2011-Current F150
      • Does NOT fit VMAX

      7. Seastar / Uflex Support Bracket Puller

      This is the tool that will make removing those stubborn support brackets a breeze. Say goodbye to head-pounding frustration and bloody knuckles. No need to use torches and hammers anymore. This high-strength stainless steel tool is guaranteed to last a lifetime and cut your support bracket removal time down to just minutes instead of an hour or more.

      8. Yamaha Lifting Kit


      When pulling a motor off a boat, you are going to need a special lifting adapter.   All Mercury outboards and the newest Yamaha motors no longer have lifting points in the block.  No Worries.  We have designed a lifting system with a universal lifting ring and adaptors that will get the job done and save you time and money.

      Fits:

      - Mercury and older outboards with 1.5"x16 threaded flywheels

      • Yamaha 5.3 V8, 4.2 V6, F200B, F115B and all future Yamaha outboards that do not have built-in lifting eyes.

      9. Universal Lifting System With FlyWheel Puller

      A complete system to fit all modern outboard motors without permanent lifting points!  We started with a forged lifting eye threaded to fit mercury threaded (1.5") flywheels. We then made two different lifting adaptors that perfectly fit the Verado and Yamaha.  Finally, our flywheel puller is designed with a zero-friction ball bearing head to produce the smoothest action on the market. 

      10. 35mm x 6mm Pin Wrench

      Another valuable tool when removing trim caps. Strength and ease of use make this wrench one of our most popular products of all time. Sold separately or part of our Pin Wrench Set.

      Marine Tech Tool strives to provide our boating customers with the very best products that you need to stay on the water. Let us know if you have any of these products!